TT10-845 10 Piece European Vehicles Terminal Tool Kit

●0943 0000 LKS 1.5mm, Pin Side
●SLK 2.8mm, Primary
●LSK 8
●SLK 2.8mm, Primary & Secondary
●ABS Mounting Tool
●E-95
●MCP 2.8mm
●MCP 4.8mm
●GSK Kombi
●AMP Round Terminal Tool, 5-7 pole

TT12-827 12 Piece Universal Terminal Tool Kit

Red Anodiezed Handle(s)
●Tube, spring-loaded, 3.3mm x 28mm
●Square Blade, 1.4mm x 28mm
●Flat Blade, 1.5mm x 24.75mm
●Flat Blade, 2.0mm x 23.00mm
●Fork Blade, 8.0mm x 24mm
●Flat Blade screwdriver, 3/16" x 1"
Green Anodiezed Handle(s)
●Tube, 3.30mm x 28mm
●Tube, 4.30mm x 13mm
●Tube, 3.75mm x 13mm
●Tube, 3.0mm x 13mm
●Flat Twin Blade, 3.0mm
●Flat Twin Blade, 1.6mm

TT19-832 19 Piece Universal Terminal Tool Kit

●Tube, spring-loaded, 3.3mm x 28mm
●Square Blade, 1.4mm x 28mm
●Flat Blade, 1.5mm x 24.75mm
●Flat Blade, 2.0mm x 23.00mm
●Fork Blade, 8.0mm x 24mm
●Flat Blade screwdriver, 3/16" x 1"
●Tube, 3.30mm x 28mm
●Tube, 4.30mm x 13mm
●Tube, 3.75mm x 13mm
●Tube, 3.0mm x 13mm
●Flat Twin Blade, 3.0mm
●Flat Twin Blade, 1.6mm
●PCM/Transmission Harness Tool
●Terminal Block Tool
●Underhood Sensor Tool
●Sheathing Ripper Tool
●ABS ECU .55 Pin Tool
●ABS ECU .35 Pin Tool
●2-1/8" Twin Prongs

TT27-849 27 Piece Terminal Tool Kit 

●Square Blade, 1.5mm x 2mm 
●Square Blade, 1.4mm x 28mm
●Flat Blade, 1.5mm x 24.75mm
●Flat Blade, 2mm x 23mm
●Fork Blade, 8mm x 24mm
●Flat Blade Screwdriver, 3/16" * 1
●Tube, Spring-Loaded, 3.3mm x 28mm
●Tube, 4.3mm x 13mm
●Tube, 3.75mm x 13mm
●Tube, 3mm x 13mm
●Flat Twin Blade, 3mm
●Flat Twin Blade, 1.5mm
●PCM/Transmission Harness Tool
●Terminal Block Tool
●Underhood Sensor Tool
●Sheathing Ripper Tool
●ABS ECU 55 Pin Tool
●ABS Ecu 35 Pin Tool
●2-1/8" Twin Prongs
●ABS 4.0mm Round Terminal Tool
●3.5mm Round Terminal Tool
●"Maxi Power Timer" 2 Pins Tool
●PIT POD/FASTON 6.3mm
●JPT/SPT Terminal Tools
●Standard 2.72mm
●Standard 1.48mm
●Secondary Tool

TT6-831 6 Piece Asian/European Vehicles Terminal Tool Kit

●PCM/Transmission Harness Tool
●Terminal Block Tool
●Underhood Sensor Tool
●Sheathing Ripper Tool
●ABS ECU .55 Pin Tool
●ABS ECU .35 Pin Tool

TT7-838 5 Piece Asian Vehicles Terminal Tool Kit

●Single Face Blade Tool, 1mm x 1mm
●Dual Face Blade Tool, 1.5mm x 1mm
●Single Face Blade Tool, 1.8mm x 1mm
●Ladder Blade Tool, 1.5mm x 0.3mm
●Knife Blade Tool, 2mm x 0.8mm

TT7-851 7 Piece Deutsch Terminal Tool Kit

●20 Gauge wire terminal tool
●16 Gauge wire terminal tool
●14 Gauge wire terminal tool
●12 Gauge wire terminal tool
●8 Gauge wire terminal tool
●4 Gauge wire terminal tool
●Removal Tool

1/2“Dr. Universal Impact Driver

ITEM NO.:UID2
FEATURES:
● Loosen rusted or frozen bolts by striking the head of the universal impact driver with a hammer blow.
● No compressed air required for operation.
● Bi-directional - use to loosen and tighten fastener
● Swivel head aids with operation in limited access situations
● Swivel head allows speed brace action to spin fasteners off after initial loosening.
● Use with impact sockets and driver bits.
MATERIAL:
● CR-V 6140 head
● Medium Carbon S-45C shaft
DIMENSIONS:
● Packing: each / polybag
● Set size: * * (CM)
● Package: PCS/ CTN

1/4” Swivel Connector

ITEM NO.:ASC4
FEATURES:
● Swivel mechanism to avoid the air hose twisted and extend the life time of air hose
● Patented Air Floating mechanism for positioning relief
● Max. Pressure: 8.5 bar
● Air Flow Range: 26.5 cfm, 751 L/min
MATERIAL:
● Aluminum Alloy
DIMENSIONS:
● Packing: Sliding Card
● Set size: * * (CM)
● Package: 100 PCS/ CTN